Mode:FS-ETH-SC09 For FX series PLC Ethernet adapter

FX series PLC Ethernet adapter,is used for the communication between FX series PLC and Ethernet Internet or 3G wireless network

Version Info                                                                          

Document name:USER MANUAL Of FS-ETH-SC09

Version:V2.0                

Revising Date: September 26,2010

Relevant Documents                                                                        

In order to use the FS-ETH-SC09 better, you also need to read the following documents:

1.Device Manager Parameters setting software manual

2. VCOMM virtual Serial Port software Manual

Content                                                                        

1.FS-ETH-SC09 1PC  

2. RJ45 Cable 1 PC,2 M

3.CD 1PC

(1) Characteristics & Technical Parameters                                                            

      

FX Series PLC refers to FX0/FX0S/FX0N/FX1N/FX2N/FX3U/FX3G ... .... .  

Notice:when the FS-ETH-SC09 is used to communicate between the PC and the FX series PLC or between PLC and PLC, it supports the RS422/RS485/RS232 communication which meet UART serial data communication standard. Some field buses such as PROFIBUS, PPI, MPI, CC-Link, PC-Link, etc., although the physical interface is RS485, they do not comply with the UART serial data format, so they do not apply to this product!

*High-speed, highly reliable industrial-grade standard, anti-interference design for harsh electromagnetic environment

* 32 bit RISC (NP7 series) ARM7TDMI 55DMIPS

* 128KB SRAM,128KB Code + 32KB Boot

*10M/100M adaptive Ethernet interface

* Support RS422/RS485 data bits 5,6,7,8 settable

* Support RS422/RS485 stop bit 1,1.5,2 settable* Support RS422/RS485 parity NONE, ODD, EVEN, MARK, SPACE settable*Support RS422/RS485 baud rate 110 ~ 115200bps standard rate settable *Support the RS422/RS485 communications which meet UART serial data communication standard, do not support field bus protocol.*Smart protocols: TCP, UDP, ARP, IP, ICMP, DHCP, BOOTP, DNS

*Support dynamic DNS *Working mode can be TCP Server, TCP Client, UDP multicast and unicast UDP *Built-in Flash memory, can save the setted parameters* Support Windows 95/98/ME/NT/2000/XP/2003/XP/Win7 operating system, Vista is not recommended * RJ45 port 1500VDC electromagnetic isolated,RS422 interface 1500VDC electromagnetic isolated,* Interface protection: power supply port has the reverse polarity protection and over current protection, RS422 interface has the surge protection ;all pins and terminals have anti-static protection.* 5V±10% DC power supply from FX series PLC RS422 socket,1W power

* Dimension: L × W × H = 65mm × 51mm × 26mm, 35mm Standard rail mounting * Operating Temperature: -40 ° C to +80 ° C (-40 ° F to 176 ° F), 5% to 95% RH (industrial grade) * Storage Temperature: -40 ° C to +80 ° C (-40 ° F to 176 ° F), 5% to 95% RH

(2)External structure &pin definition                                                              

 Ethernet interface: Standard RJ45 socket, automatically adapt 10M/1000M Ethernet .Use the standard network cable, not crossover cable whether you connect the switch or directly connect to the PC.

 

The network status LED indicator on the RJ45 socket

LINK LED (left, green)		ACT LED (right, yellow)
condition	description	condition	description
Regular light	Network cable is connected correctly, work properly.	flash	Sending and receiving data through the RJ45 port
flash	Network cable is not plugged in, no available network.	extinguish	No data transceiving

Ethernet interface RJ45 socket signal definition

Pin	Signal Name	Function	Type
1	Tx+	Positive phase differential signal line of Ethernet data sending	output
2	Tx-	negative phase differential signal line of Ethernet data sending	output
3	Rx+	Positive phase differential signal line of Ethernet data receiving	input
4	Not used		-
5	Not used		-
6	Rx-	negative phase differential signal line of Ethernet data receiving	input
7	Not used		-
8	Not used		-

 

 

RS422 communication indicator: there are three LED lights on the panel and its working state as follows:

Indicator	Regular light	Flash	Extinguish
PWR(Red)	normal	Error	Error or no power supply
TxD (yellow)	Error or reversal signal polarity	Serial port is receiving the data	Error or no communication
RxD (green)	Error or reversal signal polarity	Serial port is sending the data	Error or no communication

(3)Inner diagram                                                                    

Owing to space is limited, please login the company's official website read.

 

(4)The parameters set of FS-ETH-SC09                                                            

      

FS-ETH-SC09 needs to be configured the parameters to work correctly, the configuration parameters including the network parameters, communication protocols, connection, serial port parameters;       

(5)GX Developer software setting                                                          

      

Click the main menu "Online \ Transfer Settings" to set the COM port = FS-ETH-SC09 simulated COM port in the VCOMM virtual serial port software , the transmission speed = 9.6Kbps. Then you can use as the traditional SC-09 programming cable, and you can upload, download and compare the program data

 

(6)The usage in the LAN                                                      

      

The FS-ETH-SC09 communication in the LAN needs to ensure that PC, FS-ETH-SC09 and routers have the same gateway, The gateway: 192.168.1.1, the computer IP address: 192.168.1.108, FS-ETH-SC09 IP address: 192.168.1.250 in the following examples.

1. The communication between the PC and a FX in the LAN                                                        

 

Owing to space is limited, please login the company's official website read.

      Of course you can use FS-ETH-SC09 to simulate each PLC as a COM port on the PC in order to achieve the data communication and monitoring operation between PC and multiple PLC s

(2)The communication among the PC and multiple FXs                                                

There is a kind interface board with wide range of applications in Mitsubishi FX series PLC : FX1N-485-BD, FX2N-485-BD, FX3U-485-BD, FX3G-485-BD, all is called as FXxx-485-BD.   

Owing to space is limited, please login the company's official website read.

(3)The intercommunication among the multiple FXs                                                

      

FS-ETH-SC09 in the picture need to go through the connection between FXxx-422-BD interface board and the FX series PLC, mainly to facilitate the installation of FS-ETH-SC09, in fact it’s the same as the usage of FXxx-485-BD.       

Owing to space is limited, please login the company's official website read.

 

(7) Remote communication in the internet                                                  

       FS-ETH-SC09 can achieve the worldwide remote communication through the Internet, it will use the external network IP address of the router, the router external network address is different when the router is started every time, because the router will be randomly assigned to one IP address from the Internet when it ‘s powered every time, so this will result in trouble for remote communication through the Internet,

Owing to space is limited, please login the company's official website read.

(8) Remote wireless communication in the 3G wireless internet                                     

Owing to space is limited, please login the company's official website read.

(10)Appendix: the basic knowledge of the Ethernet                                                                  

      

For more details please visit : fourstar-dy.com

 

 

 

Mode:FS-ETH-SC09 For FX series PLC Ethernet adapter